C.A. Technologies Tanks and Cups

BC100H BLACKCAT PORTABLE HVLP The BLACKCAT is a portable HVLP system that allows the user to spray with a constant 10 psi at the gun, unlike competitive units. The 2 HP. V-Twin oil-less compressor is quiet and a proven workhorse. Match that with our 2.5 gallon pressure tank, cart, 25' air and fluid hose and Lynx L100H and you have the most uniquely designed portable unit available, (see specs below) Specifications: Horsepower: 2 HP V-Twin Air Receivers: (2) 2 gallon tanks (4 gal. total) SCFM: 5.6 to 8.8 depending on pressure Voltage: 120/Single Phase (14 AMP) Unit Weight: 156 Lbs. Max. Pressure: 120 psi / 80 psi pressure pot

OF-530-600 CAT. is proud to introduce our new flow guns for glue and other flow or pour applications. The guns are a barrel body type design with a "fore finger" trigger lever. The full motion trigger includes an infinite fluid flow control setting for precise repeatable delivery. Ideal for adhesives and glazing applications and available with six different fluid tips for various bead sizes and brush tip for special applications. Available Tip Sizes: 54-527-10 - 1.0mm     54-527-18 - 1.8mm 54-527-12 - 1.2mm     54-527-20 - 2.0mm

OF-530-600 CAT. gun and tank outfits include the following options: Teflon coated, all stainless steel or stainless steel fitted, 2.5, 5 and 10 gallon tanks. Hand and air agitated tanks available. Outfits are standard with 25' 5/16 air hose and 25' 1/4" fluid hose. Your choice of guns include the following series: L300C or H fine finish guns, L100C or H general purpose guns, Panther series for Zinc or industrial coatings. For tank specifications see pages 11-12, for gun specifications see pages 2-6, and for hose options see page 18.

OP100G-18-2266T-202 CAT. P100G outfit is designed especially for glue applications. The Panther is teflon coated for easy clean-up with stainless steel fluid passages. The 2.5 gallon tank is standard with stainless steel pick up tube, rigid plastic liner and dual regulators. The outfit includes 25' 5/16" air hose and 25' 1/4" fluid hose. Optional 3/8" diameter fluid hose is available.

1 QT. Cup Outfits CAT. 1 quart pressure cup outfits are ideal for small jobs when easy cleanup is required. These outfits have two cup options, the 51-303R and the 51-303. The 51-303R has a regulator at the gun handle for up to 10 PSI fluid pressure. The 303R can be used with the following series guns: L100H or C general purpose guns, L300H or C fine finish guns. The 51-303 cup is for L100H and L300H guns with ported heads only.

2 QT. Cup Outfits Our 2 quart cup outfits are available in two different models, the 51-600 Bandit (shown above) and the 51-130 economy cup. The Bandit cup features our 360 degree clamp cover design with rigid cup liner. Both cup models are available with dual regulators. For specifications on the cups see page 15. Both outfits include your choice of guns, L100C or H, L300C or H, Panther and Tomcat. 5' 5/16" air hose and 5'1/4" fluid hose is included.