| |
|
Marcuse & Son - Air Compressor Parts | |
The Air compressor Guys Since 1925! |
Uni-Ram Solvent Recycler - Liquid
To separate OIL and GREASE from cleaning solvents with liquid, semi-liquid or low-solid residue - Liquid Waste, Batch Processing
MODEL | TANK CAPACITY | RECYCLE TIME |
VOLTAGE (V) | AUTO FILLING AND TRANSFER | | URS970P2 | 6.6 GAL |
4-6 HR | 240 |
YES | | URS970P2SS | 6.6 GAL | 4-6 HR | 240 | YES | | URS2000PW | 20 GAL | 8-12 HR | 240 | YES | | URS2000PWSS | 20 GAL | 8-12 HR | 240 | YES | | Note: Distillation time is approximate and varies with solvent. Maximum boiling point of solvent to be recycled is 240°C. |
| | | | | | | Continuous, Auto Repeating |
MODEL | RECYCLES | VOLTAGE (V) | SPECIAL FEATURES | | AC10NL |
UP TO 2 GAL/HR | 120 |
| | AC10NLPW | UP TO 2 GAL/HR | 120 | MULTIPLE PARTS WASHERS | | AC10PL | UP TO 2 GAL/HR |
120 | PUMP VACUUM |
| AC10NH |
UP TO 2 GAL/HR | 240 | | | AC10PH | UP TO 2 GAL/HR | 240 | PUMP VACUUM | | BC30N |
UP TO 3 GAL/HR | 240 | | | D10X2 | UP TO 8 GAL/HR | 240 | OUTPUTS 2 SOLVENTS | | DC100N |
UP TO 8 GAL/HR | 240 | |
URS970P2 & URS970P2SS |
|
- Tank Capacity: 6.6 US Gal (25 litres)
- Tank Drain Valve for manual removal of liquid waste
- Speed: 6.6 US Gal in 4-6 hours
- Solvent Transfer: Auto-transfer, in and out
- Air Pressure: Min 85 PSI, unit complete with pressure
regulator and filter
- Power Supply: 220/240V, 2200W, 9.3A
- Heater: 2200W
- Display: Digital LCD (16 characters) shows selected
temperature set points in °F or °C
|
To separate OIL and GREASE from cleaning solvents with liquid, semi-liquid or low-solid residue
Solvents like mineral spirits and varsol are used to remove liquid waste like oil and grease from parts and equipment. Uni-ram Solvent Recyclers reclaim spend part washer solvents for reuse. When the unit has finished recycling, the operator drains the waste from the Distillation Tank into the waste container. The cost savings are dramatic. The purchase of solvent typically drops by over 95% and the waste hauling charge also drops by 95% or is eliminated if the waste is non-hazardous.
|
|
URS2000PW & URS2000PWSS |
|
- Tank Capacity: 20 US Gal (80 litres)
- Speed: 20 US Gal in 8-12 hours
- Solvent Transfer: Auto-transfer, in and out
- Air Pressure: Min 85 PSI, unit complete with pressure
regulator and filter
- Power Supply: 220/240V, 2200W, 9.3A
- Heater: 3400W
- Display: Digital LCD (16 characters) shows selected
temperature set points in °F or °C
|
To separate OIL and GREASE from cleaning solvents with liquid, semi-liquid or low-solid residue
Solvents like mineral spirits and varsol are used to remove liquid waste like oil and grease from parts and equipment. Uni-ram Solvent Recyclers reclaim spend part washer solvents for reuse. When the unit has finished recycling, the operator drains the waste from the Distillation Tank into the waste container. The cost savings are dramatic. The purchase of solvent typically drops by over 95% and the waste hauling charge also drops by 95% or is eliminated if the waste is non-hazardous.
|
|
AC10NL, AC10PL, AC10NH, AC10PH, AC10NLPW |
|
- Tank Capacity: NA
- Speed: Up to 2.5 Gal/hour (10 litres/hour)
- Solvent Transfer: Auto-transfer, in and out
- Air Pressure: Min 85 PSI, unit complete with pressure
regulator and filter
- Power Supply: 120V (L-Models), 240V (H-Models), 1500W
- Heater: 1500W
- Dimensions: 12 x 25.5 x 55" (WDH)
- Pump Vacuum: P-Models
|
The waste in the dirty solution must be a liquid like oil or the solution must have a low percentage of solid waste as the waste passes through a drain from the distillation tank to a waste container.
Use the portable AC10NLPW to recycle dirty solvent from multiple Parts Washers. Transfer 10 gallons of dirty solvent to the AC10NLPW and transfer previously recycled clean solvent to the Parts Washer. Recycle and push the AC10NLPW to the next Parts Washer. For use with Uni-ram Parts Washer UMW20EG or with other Parts Washers.
|
|
BC30N, BC30G, BC30P |
|
- Tank Capacity: NA
- Speed: Up to 5 Gal/hour (20 litres/hour)
- Solvent Transfer: Auto-transfer, in and out
- Air Pressure: Min 85 PSI, unit complete with pressure
regulator and filter
- Power Supply: 240V
- Heater: 3000W, Explosion-proof, sealed
- Dimensions: 31 x 30 x 44" (WDH)
- Water Separator: BC30G only
- Pump Vacuum: BC30P only
|
The waste in the dirty solution must be a liquid like oil or the solution must have a low percentage of solid waste as the waste passes through a drain from the distillation tank to a waste container.With slightly more solid waste the BC30 series can operate with a bag in the distillation tank.
Use the portable AC10NLPW to recycle dirty solvent from multiple Parts Washers. Transfer 10 gallons of dirty solvent to the AC10NLPW and transfer previously recycled clean solvent to the Parts Washer. Recycle and push the AC10NLPW to the next Parts Washer. For use with Uni-ram Parts Washer UMW20EG or with other Parts Washers.
|
|
DC100N, DC100G, DC10X2 |
|
- Tank Capacity: NA
- Speed: Up to 9 Gal/hour (35 litres/hour)
- Solvent Transfer: Auto-transfer, in and out
- Air Pressure: Min 85 PSI, unit complete with pressure
regulator and filter
- Power Supply: 240V
- Heater: 5000W, Explosion-proof, sealed
- Dimensions: 47 x 27 x 48" (WDH)
- Water Separator: DC100G only
- SPECIAL APPLICATION: DC10X2, see below
|
The waste in the dirty solution must be a liquid like oil or the solution must have a low percentage of solid waste as the waste passes through a drain from the distillation tank to a waste container.With slightly more solid waste the DC100 series can operate with a bag in the distillation tank.
When the dirty solvent solution contains two solvents that differ significantly in boiling point., the DC10X2 can output the solvents into separate drums.
|
|
|
|
